How to Guide - Manually Adding a Frequency to the UBCD436PT

Step 1: Prepare the Scanner

1. Power On the scanner.
2. If needed, exit scanning mode by pressing the Hold button to enter manual mode.

Step 2: Access Programming Mode

1. Press the Menu button to enter the main menu.
2. Use the scroll knob to navigate to Set Scan Selection and press the E/Yes button.
3. Select Edit System and press E/Yes.

Step 3: Create or Select a System

1. Choose an existing system or create a new one:
   • To create a new system, scroll to New System, press E/Yes, and select the system type (e.g., Conventional). Confirm by pressing E/Yes again.
   • To select an existing system, scroll to the system name and press E/Yes.

Step 4: Create or Select a Group

1. Choose an existing group or create a new one:
   • To create a new group, scroll to New Group, press E/Yes, and name the group using the keypad.
   • To select an existing group, scroll to the group name and press E/Yes.

Step 5: Add a Channel (Frequency)

1. Scroll to Edit Channel and press E/Yes.
2. Choose New Channel and press E/Yes.
3. Enter the desired frequency using the numeric keypad. For example, for 467.5125 MHz, press 4-6-7-.-5-1-2-5.
4. Press E/Yes to confirm.

Step 6: Set Channel Attributes

1. Name the Channel:
   • Scroll to Edit Name and press E/Yes.
   • Use the alphanumeric keypad to enter the channel name.
   • Use the scroll knob to move between characters and the ./No button to delete.
   • Press E/Yes to confirm.
2. Set Modulation (if applicable):
   • Scroll to Set Modulation, press E/Yes, and select the appropriate modulation type (e.g., Auto, AM, FM, NFM).
   • Press E/Yes to confirm.
3. Set Audio Type:
   • Scroll to Set Audio Type, press E/Yes, and select Analog, Digital, or All.
   • Press E/Yes to confirm.

Step 7: Save and Exit

1. Press Menu repeatedly to back out of the menu system and save your settings.
2. Return to scanning mode by pressing the Scan button.